Digital command station TCS-2 (BLUE)

The digital command station 2 for the control of model railway via DCC protocol. It allows control trains and accessories of the model railroad via Android application, XpressNet throttles (e.g. Roco MultiMAUS) and other application and programs compatible with Roco Z21 and XpressNet Li-ETH. The command station allows connect the feedback detectors via S88 bus or RS bus.

This is a hobby project and we have time for it only after main job. Please be patient, when you have any questions. You can use Czech discussion with Google translate or contact via e-mail only in Czech or English language.

BUY

Digital command station TCS-2

Front panel of the digital command station TCS-2

Back panel of the digital command station TCS-2

Main Features

Control of digital trains (speed, direction and up to 69 functions)
Control digital accessories of the model railroad (turnouts, signals, lamps, etc.)
Connection for the programming track (+RailCom read)
Overload and cut detection (setable delay and current)
Automatic command station settings and very easy control
Automatic find the command station and show in application
TCS Android application
Up to 10 Android devices working simultaneously
Up to 31 XpressNet throttles (e.g. Roco MultiMAUS)
Compatible with Z21 programs and applications (Max 5 devices simultaneously)
Compatible with Lenz XpressNet LAN (Li-LAN/Li-ETH) programs and applications (RailCom, Train Controller, …)
Compatible with JMRI WiThrottle (Engine Driver, ESU Cab Control II, JMRI, …) (Max 8 devices simultaneously)
Database of the trains and accessories is saved in command station on the SD card (incl. photos)
Easy update
Multi Traction (Train sets: locomotive + up to 5 pcs locomotives and wagons)
Immediate show changes on all connected devices
Control more than 1 trains simultaneously from one device
Assign trains from admin
Read and write CV registers
Connection of the feedback detectors S88 (max 31 modules with 8 inputs)
Connection of the feedback detectors RS-BUS (max 130 modules with 8 inputs)
Simultaneous control from all supported protocols, programs and apps
Encrypted communication and stored data
Automatic control on behalf of sensor state
Suitable for scales: Z, N, TT, H0, H0e, 00, G (adjustable voltage in the range of 12V to 18V)

New Features in TCS-2

Connection via Wi-Fi (two modes)
Supported RS BUS sensor modules
Compatible DCC signal with RailCom
Read locomotive address on programming rail via RailCom
Setable cut detection current
New trains from templates (photos, train functions, …) – More info here
JMRI WiThrottle
Automation (automatic actionns by sensors or buttons) – CZ article

WARNING: The Android version 6 or higher is needed for using!

The hand-controller TCS-RC can control all functions like Android app except updates and admin-user functions.

WARNING: Only Czech and English support is available.

Other languages are very hardfull to understand with a translator. There can be lost main thought.

BUY

Package contains

Package contains these things:

Command station TCS
DC adapter 18V/3A
Power cord
2x track connectors
1x RS BUS connector
Network LAN cable
SD card
Wi-Fi Antenna 3dBi
Manual (short)

The package contains all, what will you need. It is easy, just plug in and play. No more settings and complexity!

Main features in compare with other command stations

Easy control
No settings needed
All accessories are in package
All in czech and english language
Full and free Android application
Regular FREE updates
List of trains are saved on SD card
Automatic connection without manually put the IP address
Secured by PIN and crypto
Wi-Fi and LAN connection
and more…

More in CZ article: Why select the TCS command station? (Only CZ language)

Czech guides and video-guides


Videoguide: How to change address of the DCC locomotive (Read and Write CV)	Automatic rail crossing	How to control model railway over PC (Feedback detector S88 + RocRail)